The product is suitable for
More information about the product
The C50 comes in 2 different models:
C50SX: Cooling and heating
C50SRX: Cooling, heating and heating belt (for use in low ambient temperatures)
The models have dust filters for quick and easy maintenance.
NB! For new installations, the wall cannot be deeper than a maximum of 200mm, you need the hot side to face a room of a certain size for the unit to have sufficient air. Remember to drain for condensation water.
A wine room should be built as a cold room, either in wood or with cold room elements. It is advisable to combine it with a glass door and gas range. Use a moisture barrier on the warm side in accordance with NS. When built in wood.
Glass surfaces in the room must be sealed in case of a single case. Materials such as plaster and MDF are not recommended in a wine room, this is due to the moisture these materials attract. NB! If one or more walls in the wine room are made of brick, stone, uninsulated glass or other uninsulated materials, these walls should be repaired before a wine cooler is used. If you are wondering whether your room can be used for wine storage.
Contact our sales department. NB! Cold rooms built in wood: Make sure that the room is built according to NS (Norwegian standard) or better. NS specifies the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built in wood. Requirements are presented for insulation in floors, walls and ceilings, as well as a moisture barrier on the warm side of the insulation.
When using glass, we recommend a U-value of 1.2 or better. Ready-made wine room panels with a hook system in the walls, floor and ceiling are always recommended for the best possible result. They are customized to your measurements by us and are easily installed in a short time, using only the included key.
Length:
Width:
Height: