Winemaster IN50X - up to 50 m3

NB! When installing, you need 2 x Ø165 holes in the wall for 2 x Ø160 insulated pipes for and to lead air in and out to the compressor. Remember to drain for condensation water. A wine room should be built as a cold room, either in wood or with cold room elements. Feel free to combine with a glass door and gas field. Use a moisture barrier on the warm side in accordance with NS. When built in wood. Glass surfaces in the room must be sealed in case of a single case. Materials such as plaster and MDF are not recommended in a wine room, this is due to the moisture these materials attract. NB! If one or more walls in the wine room are made of brick, rock, uninsulated glass or other uninsulated materials, these walls should be repaired before a wine cooler is used. If you are wondering whether your room can be used for wine storage. Contact our sales department. NB! Cold rooms built in wood: Make sure that the room is built in accordance with NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built of wood. Requirements are presented for insulation in the floor, walls and ceiling, as well as a moisture barrier on the warm side of the insulation. When using glass, we recommend a u-value of 1.2 or better. Ready-made wine room panels with a hook system in the walls, floor and ceiling are always recommended for the best possible result. They are customized to your measurements by us and are easily installed in a short time, only using the included key.