Winemaster WINEIN25X - up to 25m3

Thermocold

Winemaster WINEIN25X - up to 25m3

59.808,00 kr

IN25X wine, wall unit for wine rooms up to 25m3 Wine cooler from WineMaster in France. IN25vin is mounted inside the wine room, it is mounted on 2 brackets, air in and out for the compressor/condenser is led via Insulated ventilation pipes Ø125 through the wall/ceiling from inside the wine room and out to rooms outside. The wine cooler is designed for self-built wooden cold rooms or Thermocold's ready-made elements. for wine rooms from 5 – 25,000 liters. 

IN25 comes in the following versions : Cooling and heating function The models have dust filters for quick and easy maintenance. NB! When installing, you need 2 x Ø165 holes in the wall for 2 x Ø160 insulated pipes to lead air in and out to the compressor. Remember to drain for condensation water.

Product number

WINEIN25X

Pairs well with
The product is suitable for
More information about the product

Ideal climate conditions for the preservation of your wine. A wine room should be built as a cold room, either in wood or with cold room elements. Combine with a glass door and gas field. Use a moisture barrier on the warm side in accordance with NS. When built in wood. Glass surfaces in the room must be sealed in case of a single case. Materials such as plaster and MDF are not recommended in a wine room, this is due to the moisture these materials attract.

NB! If one or more walls in the wine room are made of brick, rock, uninsulated glass or other uninsulated materials, these walls should be repaired before a wine cooler is put into use. If you are wondering whether your room can be used for wine storage. Contact our sales department. NB! Cold rooms built in wood: Make sure that the room is built according to NS (Norwegian standard) or better.

NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built of wood. Requirements are presented for insulation in the floor, walls and ceiling, as well as a moisture barrier on the warm side of the insulation. When using glass, we recommend a u-value of 1.2 or better. Ready-made wine room panels with a hook system in the walls, floor and ceiling are always recommended for the best possible result. They are customized to your measurements by us and are easily installed in a short time, only using the included key.

Length:
Width:
Height:

Documents
Assembly instructions
Assembly video