WineMaster WINESP40 PRO2 up to 40m3
WineMaster WINESP40 PRO2 up to 40m3
WineMaster WINESP40 PRO2 up to 40m3

Thermocold

WineMaster WINESP40 PRO2 up to 40m3

135.264,00 kr

SP40vin, split unit for wine rooms up to 40m3

Wine cooler from WineMaster in France. The SP40 series is a split machine for the wine room. Here the compressor part is mounted outside in the open air, while the evaporator/inside part is mounted either through the ceiling, inside the wine room or on the wall outside depending on the model you choose below. Pipes with the refrigerant are laid through the wall from the cold part and out to the hot part outside.

Here, the compressor is mounted on wall brackets and the evaporator is mounted based on the selected model. The wine cooler is intended for self-built wooden cold rooms or Thermocold's ready-made elements for wine rooms from 5 - 40,000 liters.

SP40 comes in the following versions: SP40 DU Duct tube evaporator. Mounted above the ceiling or on the wall outside the wine room, ducts are led into the wine room Ø125 SP40 CE Recessed ceiling evaporator. Mounted in the ceiling, can also be recessed into the ceiling/ceiling if construction allows SP40 CA built-in evaporator. Mounted inside the wine room above an artificial ceiling or built-in hidden behind the wine shelves The models have dust filters for quick and easy maintenance.

Model
Model: SP40 CA

Product number

Pairs well with
The product is suitable for
More information about the product

A wine room should be built as a cold room, either in wood or with cold room elements. It is advisable to combine it with a glass door and gas range. Use a moisture barrier on the warm side in accordance with NS. When built in wood.

Glass surfaces in the room must be sealed in a single case. Materials such as plaster and MDF are not recommended in a wine room, this is due to the moisture these materials attract. NB! If one or more walls in the wine room are made of brick, stone, uninsulated glass or other uninsulated materials, these walls should be repaired before a wine cooler is used. If you are wondering whether your room can be used for wine storage. Contact our sales department.

NB! Cold rooms built of wood: Make sure that the room is built according to NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built of wood.

Requirements are presented for insulation in floors, walls and ceilings, as well as a moisture barrier on the warm side of the insulation. When using glass, we recommend a u-value of 1.2 or better. Ready-made wine room panels with a hook system in walls, floors and ceilings are always recommended for the best possible result. They are customized to your measurements by us and can be easily installed in a short time, using only the included key.

Length:
Width:
Height:

Documents
Assembly instructions
Assembly video