TL Split Wall Evaporator for TL16

Thermocold TL split wall evaporator for cold rooms up to 17000 liters The model is suitable for self-built cold rooms or Thermocold's element cold rooms. Thermocold two-part split cooling unit is installed as two separate units. The compressor unit is placed away in a room where it will not be a nuisance to the surrounding living rooms. For example, placed in a laundry room, technical room, basement, attic, storage room or garage. These rooms also receive heat from the compressor unit. Inside the cold room, you choose a wall or ceiling-mounted cooling unit. This provides much greater flexibility with regard to mounting solutions. Winter operation kit should be installed at temperatures colder than +10°C. The installation must be carried out by authorized refrigeration installers. The refrigeration units are arranged in a cold room built up of our cold room elements with Thermocold cold room doors. Volume is stated in liters, with up to max size. Cold room built from elements: Cold rooms built from elements have better insulation than a cold room built from wood. Our 5cm thick cold room elements correspond to 10cm of insulation. Here you don't have to think about how the room will be built. Thermocold's cold room elements are quick to assemble and have a surface that prevents bacteria from multiplying. Cold storage rooms built of wood : Make sure that the room is built according to NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold storage rooms, which describes the correct construction of cold storage rooms built of wood. Requirements are presented for insulation in floors, walls and ceilings. See more information about construction here: Build your own cold storage room Ambient temperature determines the area of ​​application for the cooling unit/cooling room. At lower temperatures, which can occur in, for example, cold basements, garages, etc., winter control is required for the unit to operate optimally or not be damaged. NB! Different cold room doors, worn door seals, glass panels or glass doors in the room will require a different calculation of performance, please contact us or a dealer for an assessment of the performance of the cooling unit.