Thermocold TL 16 cooling unit for use in cold rooms up to 17,000 liters
The models are suitable for cold rooms built in wood and element rooms.
The unit does not remove condensation water automatically, so it needs a drain into the cooling room.
Thermocold cooling units are mounted from the inside of the cold room and through the cold room wall. This provides much greater flexibility in terms of mounting solutions.
For new installations, a plastic cover or ventilation grille must be installed. This is purchased separately.
See the installation guide tab for the various options.
Light opening in wall: 440x740mm
Winter operating kits should be installed at temperatures colder than +16°C.
Why choose Thermocold?
- Low power consumption
- Dust filter, easy maintenance
- Low noise level and low vibrations
- 5 year warranty
- Norwegian-made quality product
- Many mounting options, ventilation grilles or plastic cover on the back
- Digital display for temperature setting
- Best in service
The cooling units are ranked according to a cold room built up of our cold room elements with Thermocold cold room doors.
Volume is stated in liters, with up to max size.
Cold room built from elements:Cold rooms built from elements have better insulation than a cold room built from wood. Our 5cm thick cold room elements correspond to 10cm of insulation. Here you don't have to think about how the room should be built. Thermocold's cold room elements are quick to assemble and have a surface that prevents bacteria from multiplying.
Cold storage built in wood: Make sure that the room is built according to NS (Norwegian Standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built of wood. Requirements are presented for insulation in floors, walls and ceilings. See more information about construction here: Build your own cold room
Ambient temperature determines the area of application for the cooling unit/cooling room. At lower temperatures, which can occur in, for example, cold basements, garages, etc., winter control is required for the unit to operate optimally or not be damaged.
NB! Different cold room doors, worn door seals, glass panels or glass doors in the room will require a different calculation of performance, please contact us or a dealer for an assessment of the performance of the cooling unit.
